PRODUCT DATA

Stainless Steel Tanged

Stainless Steel Tanged

Graphite Laminates

A graphite sheet material mechanically bonded and available in one metre square sheets or cut gaskets. The material comprises two outer layers of graphite foil with a central tanged stainless steel core 0.1mm thick. The layers are mechanically pressed together in-house with a laminating technique that does not delaminate during punching, storage and use.





Geegraf SST

Tanged Stainless Steel Reinforced Graphite Sheet
• Minimum 99% purity graphite foil
• 0.1mm thick AISI 316 tanged stainless steel reinforcement
• Mechanically bonded laminate. No adhesive used
• Optimum material for thermal cycling applications and where vibration is a problem
• Withstands high compressive stress
• Greater recovery characteristic than flat sheet reinforced grades
• Improved blow-out resistance
• Difficult to cut by traditional methods, best results obtained by abrasive water jet cutting to produce a smooth safe edge finish
• Optimum handle ability of laminate range

Maximum service temperature: 5000C in oxidising conditions
Maximum service temperature: 7500C in inert and reducing conditions
Maximum service pressure: 200 bar
Compressibility: 30 – 35%
Recovery: 10 – 20%

Documents to download

Product Gallery

Quality

Environment

Production Methods





Gee Graphite Website Gee Valve Seals Website Live Loading Website Waterjet Cutting

By Post

Gee Graphite Ltd.
Havelock Street
Ravensthorpe
Dewsbury
West Yorkshire
WF13 3LU

Contact

  • t. +44 (0) 1924 480011
  • f. +44 (0) 1924 480017
  • e. enquiries@geegraphite.com
  • w. www.geegraphite.com